Platform design for easy carry out, the weight is less than 36kg
2.
Can not be damaged by air - inflated tires at any spot of passage
3.
Adopt special protective technology, suitable for any environment in applications
Specificatons :-
Standard Capacities
1
15
Temperture , operating Range
°C
-40-80
Combined Error
%FS
0.1,0.2
Excitation, Voltage
V
9-15(DC)
Rated output
Mv/v
0.9
Maximum Exciation Voltage
V
20
Non - linearity
%FS
0.1,0.2
Non - repeatability
%FS
0.1,0.2
Safe Overload
%FS
120
Transverse consistency
%
0.5
Single ultimate Overload
T
10
Zero balance
uv
400-1000
Full load
T
15
Temperature effect on span
%FS/10°
0.1
Input Resistance
Ω
3120
Temperature effect on zero
%FS/10°
0.1
Output Resistance
Ω
2800
Compensated
Temperature Range
°C
10-50
Insulation Resistance
MΩ
5000 (100VDC)
Protective Class
IP66
Cable length
m
15
Outline Dimensions :
* All dimensions in mm
Electrical Connections :
Excitation
:
Red
Excitation
:
Black
Output +
:
Green
Output -
:
Whint
Applicaton :
Applicable in wieghing and controling the loads for trucks and vehicles in transportation, construction, agriculture & foresty and waste processor.
Applicable in wighing the goods, farm produce , log, garbage and excavate material.
Applicable in wieght -check of law enforcement.
Applicable in checking the wieght & center of gravity of aeroplane or battle - plane.
Applicable in designing and producing vehicles, and determine load distribution of wheel an axle.
Applicable in testing the stability of special vehicles such as fork trucks, outrigger of the mini lift.
M2 Series Indicator cum Data Processing unit :
Introduction :
Weighing Indicator END - M2 adopts ∑ - Δ A/D conversion technology. As a portable Weighing instruments, it is applied in overloading test with two working models: one for road management; the other for police check.
Standard Function :-
High precision A/D conversation with readabililty 1/30000.
Call and display inner code to replace weight observing and analysis tolerance.
Able to setup zero - tracking range , zero (auto/manual) range
With function of dynamic compensation for speed and check tolerance
With nonlinerity correction function
Able to setup print function for auto/manual; no condition/under condition; daily/sorted statistics report printing
Weighing data save/check/delete/protection in case of power off
Able to input vehicle ID * axis type * axis number * test staff ID.
Standard RS232C communication interface with selectable baud rate and communication mathod.
With built - in micro printer
with selection of auto/manual for data lock method in dynamic working made
Able to save 1000 testing records and 100 testing site.
With selection of road management working mode; police check working mode
Able to setup overloading value auto/manual.
Optional Function :
Customized drawer -typed fixed overloading testing system modification.
Multi point nonlinerity correction function modification.
Technical Parameter :-
A/D conversion method : ∑ - Δ
A/D conversion speed : 200 times/sec
Max. A/D conversion bits : 24
Input signal range : -15V~30mV
Max. net Input : ≤30mV
Input sensitivity : ≥1 µV/e
Load cell excitation : DC 5V ℵ ≤120mA
Max. connection number of load cell: 8 at 350 ohm
Load cell connection mode : 4 wire
Verified counts : 3000
Max. external counts : 30000
Max. Internal solution : 600000
Division : 1/2/5/10/20/50/100 optional
Display : LCD display , with LED back light
Display Range :- -29990 ~ 999990 (e=10)
Clock : real without effect on power off
Communication interface (RS232 C standard)
Serial communication interface, with selectable baud rate by continues sending method - on command method.
